Patent attributes
A TX/RX switch includes a power amplifier (PA), a Low Noise Amplifier (LNA), and an antenna connection. The PA is connected to a PA matching network that has a PA network impedance and a common PA-LNA impedance connected in one or more series-parallel combinations in different embodiments in a transmitting mode. The LNA is connected to a LNA matching network that has a LNA. network impedance and the same common PA-LNA impedance connected in one or more series-parallel combinations in a receive mode. A mode switch can connect the common PA-LNA impedance in different configurations to enable the transmitting and receiving mode respectively. In some embodiments, the mode switch can short or open circuit the connection of the PA matching circuit or the LNA matching circuit to the antenna. In some embodiments, the mode switch can also turn power on or off to the PA or the LNA when the switch is in a mode where the respective amplifier is not selected. Accordingly, with specific design limitations on the common PA-LNA impedance combined with different mode switch configurations of the TX/RX switch components in either the TX or RX mode, the TX/RX switch operates within a design bandwidth without, transmission lines embedded in the TX/RX switch circuitry and provides optimum power transfer from/to the antenna at the antenna connection with reduced noise.
