Patent attributes
Snow is made, for use on ski slopes and the like, using compressed air at a pressure substantially less than 95 psig, preferably around 30 psig. The air is provided to a snow making head or snow gun, where it is flowed through an air nozzle having effective diameter D. The air stream intersects a water droplet stream with angle A and at distance L from the air nozzle. Preferred angle A is in the range 70 to 110 degrees. The preferred ratio L/D is in the range 9:1 and 22:1. High pressure air from existing compressor systems is reduced to a desired substantially lower pressure by a central choked flow throttle upstream of an aftercooler, or by multi-stage throttles located near the snow making head. Water is added to the compressed air to substantially improve snow making, particularly when ambient relative humidity is low.
