Patent attributes
An electrical connector for use in an area subject to fluids such as gasoline or water. Typically, the connector would be used in a fuel injector to an electronic control module found in automotive and recreational motors. Once the wires have been stripped, they are then fused to a centering section to provide a common joint. The centering section is provided with a encapsulating mold centering section featuring two opposing alignment bosses and two sections of four circumferential centering tips. Finally, a second molding process is applied. The tips and the bosses re-melt or re-flow during the second encapsulation process to provide for a centered assembly that prevents fuel or water leaking from one wire to the next through the connection.
