Patent attributes
A toner is manufactured by way of a coarse particle preparing step, a slurry preparing step, a pulverizing step, a cooling step, and a depressurizing step. Slurry of toner coarse particles obtained by way of the coarse particle preparing step and the slurry preparing step is made to pass under heat and pressure through a pressure-resistant nozzle whereby toner coarse particles are pulverized into diameter-reduced toner particles. By providing the cooling step immediately after the pulverizing step, dispersion of wax component into the toner particles is promoted. And by further providing the depressurizing step, bubbling and coarsening of the toner particles due to the bubbling are prevented. By so doing, there is obtained a diameter-reduced toner particle in which wax is evenly dispersed and which does not cause bleeding out.
