Patent attributes
An actuator has two shape memory alloys (SMAs) connected in a push-pull arrangement to a movable part. By passing current to each of the SMAs from a drive circuit part, the movable part can be driven. When a target position signal of the movable part is input to the drive circuit part, a current is passed to an SMA of the contraction side on the basis of a drive waveform obtained by adding a voltage according to the target position signal to a bias voltage, and a current is passed to the SMA on the expansion side on the basis of a signal waveform obtained by subtracting the voltage according to the target position signal from the bias voltage. Consequently, the SMA of the expansion side maintains a pre-heat state and is not cooled excessively, so that response delay at the time of the next heating can be prevented. As a result, the response of the actuator can be increased.
