Patent attributes
A controller in a receiver monitors RSSI and AGC gain levels to determine signal conditions and adjust filter performance accordingly to optimize power consumption while providing acceptable signal quality. When RSSI level is high and AGC gain is low, a strong signal-of-interest is present. In this case, adaptive filter bias currents may be reduced raise the noise floor and degrade intermodulation to reduce power consumption because the strong signal-of-interest can tolerate the higher noise and distortion. When the RSSI level is low and AGC gain is high, a weak signal is present a low noise mode may be effected by increasing bias current to filters used to lower the noise floor, but intermodulation effects may still be tolerated so those filters may be cut back. Other cases are supported. RSSI and AGC gain level thresholds may be dynamically altered based on relative RSSI and AGC levels.
