Patent attributes
A miniature camera lens actuation apparatus comprises a support structure, a camera lens element supported on the support structure by a suspension system; and an SMA actuator connected between the support structure and the movable element to drive movement of the camera lens element. The control circuit may include a drive circuit and a sensor circuit which have separate electrical connections to the SMA actuator to reduce the impact of the resistance of the electrical connections on the sensing. The control circuit may vary the drive signal in response to a temperature signal indicative of the ambient temperature. An endstop limits movement to prevent extension of the SMA actuator in its unheated state beyond a maximum length which is at or below the length corresponding the local maximum resistance of the resistance-length curve. Control of position is effected using resistance of the SMA actuator as a measure of position. The control employs a ‘ratcheting’ method to prevent a failure condition and an initial calibration step to derive a range of target resistance values. In manufacture, the position of a lens holder is adjusted relative to a carrier to provide focussing on the image sensor of an image of an object at a distance in the range from infinity to the hyperfocal distance when the SMA actuator is heated to a predetermined temperature greater than ambient temperature.
