Patent attributes
A method of preventing disruption of a taped finished drywall board joint in a room having a center ridge member and angularly inclined ceiling rafters which involves a metallic connector positioned between the wallboard sections and the ridge member and rafters. The connector has two metallic wings with a center longitudinal bendable connection. The wings have flexible tabs at their free edges which are attached to the rafters and the connector itself is attached to the wallboard adjacent to the ridge member. The wallboard also is attached to the rafters 8-12 inches from the edges of the wings. Because the tabs can bend away from the wings, this construction allows the joint to flex if the rafters warp or shrink without disrupting the finish coating on the outside of the wallboard joint at the ridge member. The connector also can be applied to other critical joints in a home where the framing members are subject to movement such as flat ceilings to avoid truss uplift or rafter movement. The wings have longitudinal corrugations in the wings and tabs to strengthen the tape. In one embodiment two wings are connected by a polymeric tape. In another embodiment, the connector is a unitary metallic part with a longitudinal line of perforations connecting the wings along the centerline to allow the connector to be bent to form the two diverging wings.