Patent attributes
A printed electrical connection structure includes a substrate having one or more electrical connection pads and a micro-transfer printed component having one or more connection posts. Each connection post is in electrical contact with a connection pad. A resin is disposed between and in contact with the substrate and the component. The resin has a reflow temperature less than a cure temperature. The resin repeatedly flows at the reflow temperature when temperature-cycled between an operating temperature and the reflow temperature but does not flow after the resin is exposed to a cure temperature. A solder can be disposed on the connection post or the connection pad. After printing and reflow, the component can be tested and, if the component fails, another component is micro-transfer printed to the substrate, the resin is reflowed again, the other component is tested and, if it passes the test, the resin is finally cured.